GeometryInfo

java.lang.Object
- org.jogamp.java3d.utils.geometry.GeometryInfo

```
public class GeometryInfo
extends java.lang.Object
```
The GeometryInfo object holds data for processing by the Java3D geometry utility tools.
The NormalGenerator adds normals to geometry without normals.
The Stripifier combines adjacent triangles into triangle strips for more efficent rendering.
Also, the GeometryCompressor can take a set of GeometryInfo objects in a CompressionSteam and generate a CompressedGeometry object from the geometry.
Geometry is loaded into a GeometryInfo in a manner similar to the GeometryArray methods. The constructor for the GeometryInfo takes a flag that specifies the kind of data being loaded. The vertex data is specified using methods that are similar to the GeometryArray methods, but with fewer variations.
The major difference between GeometryInfo and GeometryArray is that the number of vertices, vertex format, and other data are specified implictly, rather than as part of the constructor. The number of verticies comes from the number of coordinates passed to the setCoordinates() method. The format comes from the set of data components that are specified. For example, calling the setCoordinates(), setColors3() and setTextureCoordinatesParames(1, 2) methods implies a format of COORDINATES | COLOR_3 | TEXTURE_COORDINATE_2. Indexed representation is specified by calling the methods that specify the indices, for example setCoordinateIndices().
Stripped primitives are loaded using the TRIANGLE_FAN_ARRAY or TRIANGLE_STRIP_ARRAY flags to the constructor. The setStripCounts() method specifies the length of each strip.
A set of complex polygons is loaded using the POLYGON_ARRAY flag to the constructor. The setStripCounts() method specifies the length of each contour of the polygons. The setContourCounts() method specifies the number of countours in each polygon. For example, a triangle with a triangular hole would have strip counts [3, 3] (indicating two contours of three points) and contour counts [2] (indicating a single polygon with two contours).
GeometryInfo itelf contains some simple utilities, such as calculating indices for non-indexed data ("indexifying") and getting rid of unused data in your indexed geometry ("compacting").
The geometry utility tools modify the contents of the GeometryInfo. After processing, the resulting geometry can be extracted from the GeometryInfo by calling getGeometryArray(). If multiple tools are used, the order of processing should be: generate normals, then stripify. For example, to convert a general mesh of polygons without normals into an optimized mesh call:
```
         GeometryInfo gi = new GeometryInfo(GeometryInfo.POLYGON_ARRAY);
         // initialize the geometry info here
         // generate normals
         NormalGenerator ng = new NormalGenerator();
         ng.generateNormals(gi);
         // stripify
         Stripifier st = new Stripifier();
         st.stripify(gi);
         GeometryArray result = gi.getGeometryArray();
 
```
See Also:

NormalGenerator, Stripifier, CompressionStream, GeometryCompressor, GeometryArray

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`POLYGON_ARRAY` Send to the constructor to inform that the data is arranged as possibly multi-contour, possible non-planar polygons.
`static int`	`QUAD_ARRAY` Send to the constructor to inform that the data will be arranged so that each set of four vertices form an independent quad
`static int`	`TRIANGLE_ARRAY` Send to the constructor to inform that the data will be arranged so that each set of three vertices form an independent triangle
`static int`	`TRIANGLE_FAN_ARRAY` Send to the constructor to inform that the data will be arranged so that the stripCounts array indicates how many vertices to use for each triangle fan.
`static int`	`TRIANGLE_STRIP_ARRAY` Send to the constructor to inform that the data will be arranged so that the stripCounts array indicates how many vertices to use for each triangle strip.

Constructor Summary

Constructors
Constructor and Description

GeometryInfo(GeometryArray ga)
Contructor.

GeometryInfo(int primitive)
Constructor.

Constructors
Constructor and Description
`GeometryInfo(GeometryArray ga)` Contructor.
`GeometryInfo(int primitive)` Constructor.

Method Summary

All Methods Instance Methods Concrete Methods Deprecated Methods
Modifier and Type	Method and Description
`void`	`compact()` Remove unused data from an indexed dataset.
`void`	`convertToIndexedTriangles()` Convert the GeometryInfo object to have primitive type TRIANGLE_ARRAY and be indexed.
`int[]`	`getColorIndices()` Retrieves a reference to the array of indices into the color array.
`java.lang.Object[]`	`getColors()` Retrieves a reference to the colors array.
`int[]`	`getContourCounts()` Retrieves a reference to the array of contourCounts.
`int[]`	`getCoordinateIndices()` Retrieves a reference to the array of indices into the coordinate array.
`Point3f[]`	`getCoordinates()` Retrieves a reference to the coordinate array.
`GeometryArray`	`getGeometryArray()` Creates and returns a non-indexed Java 3D GeometryArray object based on the data in the GeometryInfo object.
`GeometryArray`	`getGeometryArray(boolean byRef, boolean interleaved, boolean nio)` Creates and returns a non-indexed Java 3D GeometryArray object based on the data in the GeometryInfo object.
`IndexedGeometryArray`	`getIndexedGeometryArray()` Creates and returns an IndexedGeometryArray based on the data in the GeometryInfo object.
`IndexedGeometryArray`	`getIndexedGeometryArray(boolean compact)` Creates and returns an IndexedGeometryArray based on the data in the GeometryInfo object.
`IndexedGeometryArray`	`getIndexedGeometryArray(boolean compact, boolean byRef, boolean interleaved, boolean useCoordIndexOnly, boolean nio)` Creates and returns a IndexedGeometryArray based on the data in the GeometryInfo object.
`int[]`	`getNormalIndices()` Retrieves a reference to the array of indices into the Normal array.
`Vector3f[]`	`getNormals()` Retrieves a reference to the normal array.
`int`	`getNumColorComponents()` Returns the number of color data components stored per vertex in the current GeometryInfo object (3 for RGB or 4 for RGBA).
`int`	`getNumTexCoordComponents()` Returns the number of texture coordinate components that are stored per vertex.
`int`	`getPrimitive()` Get the current primitive.
`int[]`	`getStripCounts()` Retrieves a reference to the array of stripCounts.
`int`	`getTexCoordSetCount()` Returns the number of texture coordinate sets in this GeometryInfo.
`int[]`	`getTexCoordSetMap()` Returns a reference to the texture coordinate set map.
`int[]`	`getTextureCoordinateIndices()` Deprecated. As of Java 3D 1.3 replaced by `int[] getTextureCoordinateIndices(int texCoordSet)`
`int[]`	`getTextureCoordinateIndices(int texCoordSet)` Retrieves a reference to the specified array of texture coordinate indices.
`java.lang.Object[]`	`getTextureCoordinates()` Deprecated. As of Java 3D 1.3 replaced by `getTextureCoordinates(int texCoordSet)`
`java.lang.Object[]`	`getTextureCoordinates(int texCoordSet)` Returns a reference to the indicated texture coordinate array.
`boolean`	`getUseCoordIndexOnly()` Returns true if the data in this GeometryInfo is currently formatted in the USE_COORD_INDEX_ONLY format where a single index list is used to index into all data lists.
`void`	`indexify()`
`void`	`indexify(boolean useCoordIndexOnly)` Create index lists for all data lists.
`void`	`recomputeIndices()` Redo indexes to guarantee connection information.
`void`	`reset(GeometryArray ga)` Removes all data from this GeometryInfo and populates it with the geometry from the GeometryArray.
`void`	`reset(int primitive)` Removes all data from the GeometryInfo and resets the primitive.
`void`	`reverse()` Reverse the order of all lists.
`void`	`setColorIndices(int[] colorIndices)` Sets the array of indices into the Color array.
`void`	`setColors(Color3b[] colors)` Sets the colors array.
`void`	`setColors(Color3f[] colors)` Sets the colors array.
`void`	`setColors(Color4b[] colors)` Sets the colors array.
`void`	`setColors(Color4f[] colors)` Sets the colors array.
`void`	`setColors3(byte[] colors)` Sets the colors array.
`void`	`setColors3(float[] colors)` Sets the colors array.
`void`	`setColors4(byte[] colors)` Sets the colors array.
`void`	`setColors4(float[] colors)` Sets the colors array.
`void`	`setContourCounts(int[] contourCounts)` Sets the list of contour counts.
`void`	`setCoordinateIndices(int[] coordinateIndices)` Sets the array of indices into the Coordinate array.
`void`	`setCoordinates(double[] coordinates)` Sets the coordinates array.
`void`	`setCoordinates(float[] coordinates)` Sets the coordinates array.
`void`	`setCoordinates(Point3d[] coordinates)` Sets the coordinates array.
`void`	`setCoordinates(Point3f[] coordinates)` Sets the coordinates array.
`void`	`setNormalIndices(int[] normalIndices)` Sets the array of indices into the Normal array.
`void`	`setNormals(float[] normals)` Sets the normals array.
`void`	`setNormals(Vector3f[] normals)` Sets the normals array.
`void`	`setStripCounts(int[] stripCounts)` Sets the array of strip counts.
`void`	`setTexCoordSetMap(int[] map)` Sets the mapping between texture coordinate sets and texture units.
`void`	`setTextureCoordinateIndices(int[] texIndices)` Deprecated. As of Java 3D 1.3 replaced by `setTextureCoordinateIndices(int texCoordSet, int indices[])`
`void`	`setTextureCoordinateIndices(int texCoordSet, int[] texIndices)` Sets one of the texture coordinate index arrays.
`void`	`setTextureCoordinateParams(int numSets, int dim)` This method is used to specify the number of texture coordinate sets and the dimensionality of the texture coordinates.
`void`	`setTextureCoordinates(int texCoordSet, float[] texCoords)` Sets the texture coordinates array by copying the data into the GeometryInfo object.
`void`	`setTextureCoordinates(int texCoordSet, TexCoord2f[] texCoords)` Sets the 2D texture coordinates for the specified set.
`void`	`setTextureCoordinates(int texCoordSet, TexCoord3f[] texCoords)` Sets the texture coordinates array for the specified set.
`void`	`setTextureCoordinates(int texCoordSet, TexCoord4f[] texCoords)` Sets the texture coordinates array for the specified set.
`void`	`setTextureCoordinates(Point2f[] texCoords)` Deprecated. As of Java 3D 1.3 replaced by `setTextureCoordinates(int texCoordSet, TexCoord2f coords[])`
`void`	`setTextureCoordinates(Point3f[] texCoords)` Deprecated. As of Java 3D 1.3 replaced by `setTextureCoordinates(int texCoordSet, TexCoord3f coords[])`
`void`	`setTextureCoordinates2(float[] texCoords)` Deprecated. As of Java 3D 1.3 replaced by `setTextureCoordinates(int texCoordSet, float texCoords[])`
`void`	`setTextureCoordinates3(float[] texCoords)` Deprecated. As of Java 3D 1.3 replaced by `setTextureCoordinates(int texCoordSet, float texCoords[])`
`void`	`setUseCoordIndexOnly(boolean useCoordIndexOnly)` Tells the GeometryInfo that its data is formatted in the USE_COORD_INDEX_ONLY format with a single index list (the coordinate index list) that indexes into all data lists (coordinates, normals, colors, and texture coordinates).
`void`	`setVertexAttributes(int vertexAttrCount, int[] vertexAttrSizes)`
`void`	`unindexify()` Get rid of index lists by reorganizing data into an un-indexed format.

Methods inherited from class java.lang.Object
equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - TRIANGLE_ARRAY
```
public static final int TRIANGLE_ARRAY
```
    Send to the constructor to inform that the data will be arranged so that each set of three vertices form an independent triangle
    
    See Also:
    
    Constant Field Values
  - QUAD_ARRAY
```
public static final int QUAD_ARRAY
```
    Send to the constructor to inform that the data will be arranged so that each set of four vertices form an independent quad
    
    See Also:
    
    Constant Field Values
  - TRIANGLE_FAN_ARRAY
```
public static final int TRIANGLE_FAN_ARRAY
```
    Send to the constructor to inform that the data will be arranged so that the stripCounts array indicates how many vertices to use for each triangle fan.
    
    See Also:
    
    Constant Field Values
  - TRIANGLE_STRIP_ARRAY
```
public static final int TRIANGLE_STRIP_ARRAY
```
    Send to the constructor to inform that the data will be arranged so that the stripCounts array indicates how many vertices to use for each triangle strip.
    
    See Also:
    
    Constant Field Values
  - POLYGON_ARRAY
```
public static final int POLYGON_ARRAY
```
    Send to the constructor to inform that the data is arranged as possibly multi-contour, possible non-planar polygons. The stripCounts array indicates how many vertices to use for each contour, and the contourCounts array indicates how many stripCounts entries to use for each polygon. The first contour is the bounding polygon, and subsequent contours are "holes." If contourCounts is left null, the default is one contour per polygon.
    
    See Also:
    
    Constant Field Values
- Constructor Detail
  - GeometryInfo
```
public GeometryInfo(int primitive)
```
    Constructor. Creates an empty GeometryInfo object.
    
    Parameters:
    
    primitive - Tells the GeometryInfo object the type of primitive data to be stored in it, so it will know the format of the data. It can be one of TRIANGLE_ARRAY, QUAD_ARRAY, TRIANGLE_FAN_ARRAY, TRIANGLE_STRIP_ARRAY, or POLYGON_ARRAY.
  - GeometryInfo
```
public GeometryInfo(GeometryArray ga)
```
    Contructor. Populates the GeometryInfo with the geometry from the GeometryArray.
    If the GeometryArray uses the Initial and Valid GeometryArray methods (setInitialVertexIndex() and setValidVertexCount() and their cousins) then only the needed geometry is copied into the GeometryInfo.
- Method Detail
  - reset
```
public void reset(int primitive)
```
    Removes all data from the GeometryInfo and resets the primitive. After a call to reset(), the GeometryInfo object will be just like it was when it was newly constructed.
    
    Parameters:
    
    primitive - Either TRIANGLE_ARRAY, QUAD_ARRAY, TRIANGLE_FAN_ARRAY, TRIANGLE_STRIP_ARRAY, or POLYGON_ARRAY. Tells the GeometryInfo object the type of primitive data to be stored in it, so it will know the format of the data.
  - reset
```
public void reset(GeometryArray ga)
```
    Removes all data from this GeometryInfo and populates it with the geometry from the GeometryArray.
  - convertToIndexedTriangles
```
public void convertToIndexedTriangles()
```
    Convert the GeometryInfo object to have primitive type TRIANGLE_ARRAY and be indexed.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - getPrimitive
```
public int getPrimitive()
```
    Get the current primitive. Some of the utilities may change the primitive type of the data stored in the GeometryInfo object (for example, the stripifyer will change it to TRIANGLE_STRIP_ARRAY).
  - setCoordinates
```
public void setCoordinates(Point3f[] coordinates)
```
    Sets the coordinates array. No data copying is done because a reference to user data is used.
  - setCoordinates
```
public void setCoordinates(Point3d[] coordinates)
```
    Sets the coordinates array. The points are copied into the GeometryInfo object.
  - setCoordinates
```
public void setCoordinates(float[] coordinates)
```
    Sets the coordinates array. The points are copied into the GeometryInfo object.
  - setCoordinates
```
public void setCoordinates(double[] coordinates)
```
    Sets the coordinates array. The points are copied into the GeometryInfo object.
  - getCoordinates
```
public Point3f[] getCoordinates()
```
    Retrieves a reference to the coordinate array.
  - setColors
```
public void setColors(Color3f[] colors)
```
    Sets the colors array. No data copying is done because a reference to user data is used.
  - setColors
```
public void setColors(Color4f[] colors)
```
    Sets the colors array. No data copying is done because a reference to user data is used.
  - setColors
```
public void setColors(Color3b[] colors)
```
    Sets the colors array. The points are copied into the GeometryInfo object.
  - setColors
```
public void setColors(Color4b[] colors)
```
    Sets the colors array. The points are copied into the GeometryInfo object.
  - setColors3
```
public void setColors3(float[] colors)
```
    Sets the colors array. The points are copied into the GeometryInfo object, assuming 3 components (R, G, and B) per vertex.
  - setColors4
```
public void setColors4(float[] colors)
```
    Sets the colors array. The points are copied into the GeometryInfo object, assuming 4 components (R, G, B, and A) per vertex.
  - setColors3
```
public void setColors3(byte[] colors)
```
    Sets the colors array. The points are copied into the GeometryInfo object, assuming 3 components (R, G, and B) per vertex.
  - setColors4
```
public void setColors4(byte[] colors)
```
    Sets the colors array. The points are copied into the GeometryInfo object, assuming 4 components (R, G, B, and A) per vertex.
  - getColors
```
public java.lang.Object[] getColors()
```
    Retrieves a reference to the colors array. Will be either Color3f[] or Color4f[] depending on the type of the input data. Call getNumColorComponents() to find out which version is returned.
  - getNumColorComponents
```
public int getNumColorComponents()
```
    Returns the number of color data components stored per vertex in the current GeometryInfo object (3 for RGB or 4 for RGBA). If no colors are currently defined, 0 is returned.
  - setNormals
```
public void setNormals(Vector3f[] normals)
```
    Sets the normals array. No data copying is done because a reference to user data is used.
  - setNormals
```
public void setNormals(float[] normals)
```
    Sets the normals array. The points are copied into the GeometryInfo object.
  - getNormals
```
public Vector3f[] getNormals()
```
    Retrieves a reference to the normal array.
  - setTextureCoordinateParams
```
public void setTextureCoordinateParams(int numSets,
                                       int dim)
```
    This method is used to specify the number of texture coordinate sets and the dimensionality of the texture coordinates. The number of texture coordinate sets must be specified to the GeometryInfo class before any of the sets are specified. The dimensionality of the texture coordinates may be 2, 3, or 4, corresponding to 2D, 3D, or 4D texture coordinates respectively.(All sets must have the same dimensionality.) The default is zero, 2D texture coordinate sets. This method should be called before any texture coordinate sets are specified because calling this method will delete all previously specified texture coordinate and texture coordinate index arrays associated with this GeometryInfo. For example:
    geomInfo.setTextureCoordinateParams(2, 3); geomInfo.setTextureCoordinates(0, tex0); geomInfo.setTextureCoordinates(1, tex1); geomInfo.setTextureCoordinateParams(1, 2); geomInfo.getTexCoordSetCount();
    The second call to setTextureCoordinateParams will erase all the texture coordinate arrays, so the subsequent call to getTexCoordSetCount will return 1.
    Parameters:
    
    numSets - The number of texture coordinate sets that will be specified for this GeometryInfo object.
    
    dim - The dimensionality of the texture coordinates. Has to be 2, 3 or 4.
    
    Throws:
    
    java.lang.IllegalArgumentException - if the dimensionality of the texture coordinates is not one of 2, 3 or 4.
  - getTexCoordSetCount
```
public int getTexCoordSetCount()
```
    Returns the number of texture coordinate sets in this GeometryInfo. This value is set with setTextureCoordinateParams(). If setTextureCoordinateParams() has not been called, 0 is returned unless one of the deprecated texture coordinate methods has been called. Calling one of the deprecated texture coordinate methods sets the count to 1. The deprecated texture coordinate methods are those that don't take texCoordSet as the first parameter.
    
    Returns:
    
    the number of texture coordinate sets in this GeometryInfo.
  - getNumTexCoordComponents
```
public int getNumTexCoordComponents()
```
    Returns the number of texture coordinate components that are stored per vertex. Returns 2 for ST (2D), 3 for STR (3D), or 4 for STRQ (4D), aslo known as the "dimensionality" of the coordinates. This value is set with setTextureCoordinateParams(). If setTextureCoordinateParams() has not been called, 0 is returned unless one of the deprecated texture coordinate methods has been called. Calling one of the deprecated texture coordinate methods sets the dimensionality explicitly (if you called setTextureCoordinates(Point2f[]) then 2 is returned). The deprecated texture coordinate methods are those that don't take texCoordSet as the first parameter.
  - setTexCoordSetMap
```
public void setTexCoordSetMap(int[] map)
```
    Sets the mapping between texture coordinate sets and texture units. See the GeometryArray constructor for further details.
    Note: If the texCoordSetMap is not set, multi-texturing is turned off. Only the texture coordinate set at index 0 (if set) will be used. Any other sets specified by the GeometryInfo.setTextureCoordinate* methods will be ignored.
  - getTexCoordSetMap
```
public int[] getTexCoordSetMap()
```
    Returns a reference to the texture coordinate set map. See the GeometryArray constructor for further details.
  - setTextureCoordinates
```
public void setTextureCoordinates(int texCoordSet,
                                  TexCoord2f[] texCoords)
```
    Sets the 2D texture coordinates for the specified set. No data copying is done - a reference to user data is used.
    
    Parameters:
    
    texCoordSet - The texture coordinate set for which these coordinates are being specified.
    
    texCoords - Array of 2D texture coordinates.
    
    Throws:
    
    java.lang.IllegalArgumentException - if texCoordSet < 0 or texCoordSet >= texCoordSetCount, or the texture coordinate parameters were not previously set by calling setTextureCoordinateParams(texCoordSetCount, 2).
  - setTextureCoordinates
```
public void setTextureCoordinates(Point2f[] texCoords)
```
    Deprecated. As of Java 3D 1.3 replaced by setTextureCoordinates(int texCoordSet, TexCoord2f coords[])
    
    Sets the TextureCoordinates array by copying the data into the GeometryInfo object. This method sets the number of texture coordinate sets to 1, sets the dimensionality of the texture coordinates to 2, and sets the coordinates for texture coordinate set 0.
  - setTextureCoordinates
```
public void setTextureCoordinates(int texCoordSet,
                                  TexCoord3f[] texCoords)
```
    Sets the texture coordinates array for the specified set. No data copying is done - a reference to user data is used.
    
    Parameters:
    
    texCoordSet - The texture coordinate set for which these coordinates are being specified.
    
    texCoords - Array of 3D texture coordinates.
    
    Throws:
    
    java.lang.IllegalArgumentException - if texCoordSet < 0 or texCoordSet >= texCoordSetCount, or the texture coordinate parameters were not previously set by calling setTextureCoordinateParams(texCoordSetCount, 3).
  - setTextureCoordinates
```
public void setTextureCoordinates(Point3f[] texCoords)
```
    Deprecated. As of Java 3D 1.3 replaced by setTextureCoordinates(int texCoordSet, TexCoord3f coords[])
    
    Sets the TextureCoordinates array by copying the data into the GeometryInfo object. This method sets the number of texture coordinate sets to 1, sets the dimensionality of the texture coordinates to 3, and sets the coordinates for texture coordinate set 0.
  - setTextureCoordinates
```
public void setTextureCoordinates(int texCoordSet,
                                  TexCoord4f[] texCoords)
```
    Sets the texture coordinates array for the specified set. No data copying is done - a reference to user data is used.
    
    Parameters:
    
    texCoordSet - The texture coordinate set for which these coordinates are being specified.
    
    texCoords - Array of 4D texture coordinates.
    
    Throws:
    
    java.lang.IllegalArgumentException - if texCoordSet < 0 or texCoordSet >= texCoordSetCount, or the texture coordinate parameters were not previously set by calling setTextureCoordinateParams(texCoordSetCount, 4).
  - setTextureCoordinates
```
public void setTextureCoordinates(int texCoordSet,
                                  float[] texCoords)
```
    Sets the texture coordinates array by copying the data into the GeometryInfo object. The number of sets and dimensionality of the sets must have been set previously with setTextureCoordinateParams(texCoordSetCount, dim).
    
    Parameters:
    
    texCoordSet - The texture coordinate set for which these coordinates are being specified.
    
    texCoords - The float array of texture coordinates. For n texture coordinates with dimensionality d, there must be d*n floats in the array.
    
    Throws:
    
    java.lang.IllegalArgumentException - if texCoordSet < 0 or texCoordSet >= texCoordSetCount, or the texture coordinate parameters were not previously set by calling setTextureCoordinateParams.
  - setTextureCoordinates2
```
public void setTextureCoordinates2(float[] texCoords)
```
    Deprecated. As of Java 3D 1.3 replaced by setTextureCoordinates(int texCoordSet, float texCoords[])
    
    Sets the texture coordinates array by copying the data into the GeometryInfo object, assuming two numbers (S and T) per vertex. This method sets the number of texture coordinate sets to 1, sets the dimensionality of the texture coordinates to 2, and sets the coordinates for texture coordinate set 0.
  - setTextureCoordinates3
```
public void setTextureCoordinates3(float[] texCoords)
```
    Deprecated. As of Java 3D 1.3 replaced by setTextureCoordinates(int texCoordSet, float texCoords[])
    
    Sets the TextureCoordinates array by copying the data into the GeometryInfo object, assuming three numbers (S, T, & R) per vertex. This method sets the number of texture coordinate sets to 1, sets the dimensionality of the texture coordinates to 3, and sets the coordinates for texture coordinate set 0.
  - getTextureCoordinates
```
public java.lang.Object[] getTextureCoordinates(int texCoordSet)
```
    Returns a reference to the indicated texture coordinate array. The return type will be TexCoord2f[], TexCoord3f[], or TexCoord4f[] depending on the current dimensionality of the texture coordinates in the GeometryInfo object. Use getNumTexCoordComponents() to find out which version is returned.
    
    Parameters:
    
    texCoordSet - The index of the texture coordinate set to retrieve.
    
    Returns:
    
    An array of texture coordinates at the specified index
    
    Throws:
    
    java.lang.IllegalArgumentException - If texCoordSet < 0 or texCoordSet >= texCoordSetCount
  - getTextureCoordinates
```
public java.lang.Object[] getTextureCoordinates()
```
    Deprecated. As of Java 3D 1.3 replaced by getTextureCoordinates(int texCoordSet)
    
    Retrieves a reference to texture coordinate set 0. The return type will be TexCoord2f[], TexCoord3f[], or TexCoord4f[] depending on the current dimensionality of the texture coordinates in the GeometryInfo object. Use getNumTexCoordComponents() to find out which version is returned. Equivalent to getTextureCoordinates(0).
    
    Returns:
    
    An array of texture coordinates for set 0.
  - setCoordinateIndices
```
public void setCoordinateIndices(int[] coordinateIndices)
```
    Sets the array of indices into the Coordinate array. No data copying is done - a reference to user data is used.
  - getCoordinateIndices
```
public int[] getCoordinateIndices()
```
    Retrieves a reference to the array of indices into the coordinate array.
    This method should be considered for advanced users only. Novice users should just use getGeometryArray() to retrieve their data so that the internal format of GeometryInfo is of no concern.
    Depending on which of the utility routines you've called on your GeometryInfo object, the results may not be what you expect. If you've called the Stripifier, your GeometryInfo object's Primitive has been changed to indexed TRIANGLE_STRIP_ARRAY and your data will be formatted accordingly. Similarly, if you've called the Triangulator, your data is in indexed TRIANGLE_ARRAY format. Generating normals with the NormalGenerator utility will convert your data to indexed TRIANGLE_ARRAY also, but if you call getGeometryArray without calling the Stripifier or Triangulator, your data will be converted back to the original primitive type when creating the GeometryArray object to pass back. However, if your creaseAngle was not Math.PI (no creases - smooth shading), then the introduction of creases into your model may have split primitives, lengthening the StripCounts and index arrays from your original data.
  - setColorIndices
```
public void setColorIndices(int[] colorIndices)
```
    Sets the array of indices into the Color array. No data copying is done - a reference to user data is used.
  - getColorIndices
```
public int[] getColorIndices()
```
    Retrieves a reference to the array of indices into the color array.
    This method should be considered for advanced users only. Novice users should just use getGeometryArray() to retrieve their data so that the internal format of GeometryInfo is of no concern.
    Depending on which of the utility routines you've called on your GeometryInfo object, the results may not be what you expect. If you've called the Stripifier, your GeometryInfo object's Primitive has been changed to indexed TRIANGLE_STRIP_ARRAY and your data will be formatted accordingly. Similarly, if you've called the Triangulator, your data is in indexed TRIANGLE_ARRAY format. Generating normals with the NormalGenerator utility will convert your data to indexed TRIANGLE_ARRAY also, but if you call getGeometryArray without calling the Stripifier or Triangulator, your data will be converted back to the original primitive type when creating the GeometryArray object to pass back. However, if your creaseAngle was not Math.PI (no creases - smooth shading), then the introduction of creases into your model may have split primitives, lengthening the StripCounts and index arrays from your original data.
  - setNormalIndices
```
public void setNormalIndices(int[] normalIndices)
```
    Sets the array of indices into the Normal array. No data copying is done - a reference to user data is used.
  - getNormalIndices
```
public int[] getNormalIndices()
```
    Retrieves a reference to the array of indices into the Normal array.
    This method should be considered for advanced users only. Novice users should just use getGeometryArray() to retrieve their data so that the internal format of GeometryInfo is of no concern.
    Depending on which of the utility routines you've called on your GeometryInfo object, the results may not be what you expect. If you've called the Stripifier, your GeometryInfo object's Primitive has been changed to indexed TRIANGLE_STRIP_ARRAY and your data will be formatted accordingly. Similarly, if you've called the Triangulator, your data is in indexed TRIANGLE_ARRAY format. Generating normals with the NormalGenerator utility will convert your data to indexed TRIANGLE_ARRAY also, but if you call getGeometryArray without calling the Stripifier or Triangulator, your data will be converted back to the original primitive type when creating the GeometryArray object to pass back. However, if your creaseAngle was not Math.PI (no creases - smooth shading), then the introduction of creases into your model may have split primitives, lengthening the StripCounts and index arrays from your original data.
  - setTextureCoordinateIndices
```
public void setTextureCoordinateIndices(int texCoordSet,
                                        int[] texIndices)
```
    Sets one of the texture coordinate index arrays. No data copying is done - a reference to user data is used.
    
    Parameters:
    
    texCoordSet - The texture coordinate set for which these coordinate indices are being specified.
    
    texIndices - The integer array of indices into the specified texture coordinate set
    
    Throws:
    
    java.lang.IllegalArgumentException - If texCoordSet < 0 or texCoordSet >= texCoordSetCount.
  - setTextureCoordinateIndices
```
public void setTextureCoordinateIndices(int[] texIndices)
```
    Deprecated. As of Java 3D 1.3 replaced by setTextureCoordinateIndices(int texCoordSet, int indices[])
    
    Sets the array of indices into texture coordinate set 0. Do not call this method if you are using more than one set of texture coordinates. No data is copied - a reference to the user data is used.
    
    Throws:
    
    java.lang.IllegalArgumentException - If texCoordSetCount > 1.
  - getTextureCoordinateIndices
```
public int[] getTextureCoordinateIndices(int texCoordSet)
```
    Retrieves a reference to the specified array of texture coordinate indices.
    This method should be considered for advanced users only. Novice users should just use getGeometryArray() to retrieve their data so that the internal format of GeometryInfo is of no concern.
    Depending on which of the utility routines you've called on your GeometryInfo object, the results may not be what you expect. If you've called the Stripifier, your GeometryInfo object's Primitive has been changed to indexed TRIANGLE_STRIP_ARRAY and your data will be formatted accordingly. Similarly, if you've called the Triangulator, your data is in indexed TRIANGLE_ARRAY format. Generating normals with the NormalGenerator utility will convert your data to indexed TRIANGLE_ARRAY also, but if you call getGeometryArray without calling the Stripifier or Triangulator, your data will be converted back to the original primitive type when creating the GeometryArray object to pass back. However, if your creaseAngle was not Math.PI (no creases - smooth shading), then the introduction of creases into your model may have split primitives, lengthening the StripCounts and index arrays from your original data.
    
    Parameters:
    
    texCoordSet - The texture coordinate index set to be retrieved.
    
    Returns:
    
    Integer array of the texture coordinate indices for the specified set.
  - getTextureCoordinateIndices
```
public int[] getTextureCoordinateIndices()
```
    Deprecated. As of Java 3D 1.3 replaced by int[] getTextureCoordinateIndices(int texCoordSet)
    
    Returns a reference to texture coordinate index set 0. Equivalent to getTextureCoordinateIndices(0).
    
    Returns:
    
    Integer array of the texture coordinate indices for set 0
  - setStripCounts
```
public void setStripCounts(int[] stripCounts)
```
    Sets the array of strip counts. If index lists have been set for this GeomteryInfo object then the data is indexed and the stripCounts are like stripIndexCounts. If no index lists have been set then the data is non-indexed and the stripCounts are like stripVertexCounts.
    
    See Also:
    
    GeometryStripArray#GeometryStripArray(int, int, int[] stripVertexCounts), IndexedGeometryStripArray#IndexedGeometryStripArray(int, int, int, int[] stripIndexCounts)
  - getStripCounts
```
public int[] getStripCounts()
```
    Retrieves a reference to the array of stripCounts.
    This method should be considered for advanced users only. Novice users should just use getGeometryArray() to retrieve their data so that the internal format of GeometryInfo is of no concern.
    Depending on which of the utility routines you've called on your GeometryInfo object, the results may not be what you expect. If you've called the Stripifier, your GeometryInfo object's Primitive has been changed to indexed TRIANGLE_STRIP_ARRAY and your data will be formatted accordingly. Similarly, if you've called the Triangulator, your data is in indexed TRIANGLE_ARRAY format. Generating normals with the NormalGenerator utility will convert your data to indexed TRIANGLE_ARRAY also, but if you call getGeometryArray without calling the Stripifier or Triangulator, your data will be converted back to the original primitive type when creating the GeometryArray object to pass back. However, if your creaseAngle was not Math.PI (no creases - smooth shading), then the introduction of creases into your model may have split primitives, lengthening the StripCounts and index arrays from your original data.
  - setContourCounts
```
public void setContourCounts(int[] contourCounts)
```
    Sets the list of contour counts. Only used with the POLYGON_ARRAY primitive. Polygons can be made of several vertex lists called contours. The first list is the polygon, and subsequent lists are "holes" that are removed from the polygon. All of the holes must be contained entirely within the polygon.
  - setVertexAttributes
```
public void setVertexAttributes(int vertexAttrCount,
                                int[] vertexAttrSizes)
```
  - getContourCounts
```
public int[] getContourCounts()
```
    Retrieves a reference to the array of contourCounts.
  - indexify
```
public void indexify(boolean useCoordIndexOnly)
```
    Create index lists for all data lists. Identical data entries are guaranteed to use the same index value. Does not remove unused data values from the object - call compact() to do this.
    
    Parameters:
    
    useCoordIndexOnly - Reformat the data into the GeometryArray.USE_COORD_INDEX_ONLY format where there is only one index list. If the data is already in the USE_COORD_INDEX_ONLY format, sending false (or calling indexify()) will change it to the normal indexed format.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - indexify
```
public void indexify()
```
  - compact
```
public void compact()
```
    Remove unused data from an indexed dataset. Indexed data may contain data entries that are never referenced by the dataset. This routine will remove those entries where appropriate and renumber the indices to match the new values.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - unindexify
```
public void unindexify()
```
    Get rid of index lists by reorganizing data into an un-indexed format. Does nothing if no index lists are set.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - recomputeIndices
```
public void recomputeIndices()
```
    Redo indexes to guarantee connection information. Use this routine if your original data is in indexed format, but you don't trust that the indexing is correct. After this routine it is guaranteed that two points with the same position will have the same coordinate index (for example). Try this if you see glitches in your normals or stripification, to rule out bad indexing as the source of the problem. Works with normal indexed format or USE_COORD_INDEX_ONLY format.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - reverse
```
public void reverse()
```
    Reverse the order of all lists. If your polygons are formatted with clockwise winding, you will always see the back and never the front. (Java 3D always wants vertices specified with a counter-clockwise winding.) This method will (in effect) reverse the winding of your data by inverting all of the index lists and the stripCounts and contourCounts lists.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - getUseCoordIndexOnly
```
public boolean getUseCoordIndexOnly()
```
    Returns true if the data in this GeometryInfo is currently formatted in the USE_COORD_INDEX_ONLY format where a single index list is used to index into all data lists.
    
    See Also:
    
    indexify(boolean), getIndexedGeometryArray(boolean, boolean, boolean, boolean, boolean)
  - setUseCoordIndexOnly
```
public void setUseCoordIndexOnly(boolean useCoordIndexOnly)
```
    Tells the GeometryInfo that its data is formatted in the USE_COORD_INDEX_ONLY format with a single index list (the coordinate index list) that indexes into all data lists (coordinates, normals, colors, and texture coordinates). NOTE: this will not convert the data for you. This method is for when you are sending in data useng the setCoordinates, setNormals, setColors, and/or setTextureCoordinates methods, and you are only setting one index using setCoordinateIndices(). If you want GeometryInfo to convert your data to the USE_COORD_INDEX_ONLY format, use indexify(true) or getIndexedGeometryArray with the useCoordIndexOnly parameter set to true.
    
    See Also:
    
    indexify(boolean), getIndexedGeometryArray(boolean, boolean, boolean, boolean, boolean)
  - getGeometryArray
```
public GeometryArray getGeometryArray(boolean byRef,
                                      boolean interleaved,
                                      boolean nio)
```
    Creates and returns a non-indexed Java 3D GeometryArray object based on the data in the GeometryInfo object. This object is suitable to be attached to a Shape3D node for rendering.
    
    Parameters:
    
    byRef - Use geometry BY_REFERENCE
    
    interleaved - Use INTERLEAVED geometry. Implies byRef is true as well.
    
    nio - Create GeometryArray using java.nio.Buffer for geometry arrays. Only usable on JDK 1.4 or higher. Implies byRef is true as well.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - getGeometryArray
```
public GeometryArray getGeometryArray()
```
    Creates and returns a non-indexed Java 3D GeometryArray object based on the data in the GeometryInfo object. This object is suitable to be attached to a Shape3D node for rendering. The geometry is not created using data BY_REFERENCE, INTERLEAVED, or USE_NIO_BUFFER.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - getIndexedGeometryArray
```
public IndexedGeometryArray getIndexedGeometryArray(boolean compact,
                                                    boolean byRef,
                                                    boolean interleaved,
                                                    boolean useCoordIndexOnly,
                                                    boolean nio)
```
    Creates and returns a IndexedGeometryArray based on the data in the GeometryInfo object. This object is suitable to be attached to a Shape3D node for rendering.
    
    Parameters:
    
    compact - Remove Coordinates, Colors, Normals, and TextureCoordinates that aren't referenced by any indices.
    
    byRef - Create the IndexedGeometryArray using geometry BY_REFERENCE.
    
    interleaved - Use INTERLEAVED geometry. Implies byRef is true as well.
    
    useCoordIndexOnly - Create the IndexedGeometryArray using USE_COORD_INDEX_ONLY. Values from the coordinate index array are used as a single set of indices into all vertex component arrays (coord, color, normal, and texCoord).
    
    nio - Create GeometryArray using java.nio.Buffer for geometry arrays. Only usable on JDK 1.4 or higher. Implies byRef is true as well.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - getIndexedGeometryArray
```
public IndexedGeometryArray getIndexedGeometryArray(boolean compact)
```
    Creates and returns an IndexedGeometryArray based on the data in the GeometryInfo object. This object is suitable to be attached to a Shape3D node for rendering. Equivalent to getIndexedGeometryArray(compact, false, false, false, false).
    
    Parameters:
    
    compact - Remove Coordinates, Colors, Normals, and TextureCoordinates that aren't referenced by any indices.
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).
  - getIndexedGeometryArray
```
public IndexedGeometryArray getIndexedGeometryArray()
```
    Creates and returns an IndexedGeometryArray based on the data in the GeometryInfo object. This object is suitable to be attached to a Shape3D node for rendering. Equivalent to getIndexedGeometryArray(false, false, false, false, false).
    
    Throws:
    
    java.lang.IllegalArgumentException - if coordinate data is missing, if the index lists aren't all the same length, if an index list is set and the corresponding data list isn't set, if a data list is set and the corresponding index list is unset (unless all index lists are unset or in USE_COORD_INDEX_ONLY format), if StripCounts or ContourCounts is inconsistent with the current primitive, if the sum of the contourCounts array doesn't equal the length of the StripCounts array, or if the number of vertices isn't a multiple of three (for triangles) or four (for quads).

Class GeometryInfo

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

TRIANGLE_ARRAY

QUAD_ARRAY

TRIANGLE_FAN_ARRAY

TRIANGLE_STRIP_ARRAY

POLYGON_ARRAY

Constructor Detail

GeometryInfo

GeometryInfo

Method Detail

reset

reset

convertToIndexedTriangles

getPrimitive

setCoordinates

setCoordinates

setCoordinates

setCoordinates

getCoordinates

setColors

setColors

setColors

setColors

setColors3

setColors4

setColors3

setColors4

getColors

getNumColorComponents

setNormals

setNormals

getNormals

setTextureCoordinateParams

getTexCoordSetCount

getNumTexCoordComponents

setTexCoordSetMap

getTexCoordSetMap

setTextureCoordinates

setTextureCoordinates

setTextureCoordinates

setTextureCoordinates

setTextureCoordinates

setTextureCoordinates

setTextureCoordinates2

setTextureCoordinates3

getTextureCoordinates

getTextureCoordinates

setCoordinateIndices

getCoordinateIndices

setColorIndices

getColorIndices

setNormalIndices

getNormalIndices

setTextureCoordinateIndices

setTextureCoordinateIndices

getTextureCoordinateIndices

getTextureCoordinateIndices

setStripCounts

getStripCounts

setContourCounts

setVertexAttributes

getContourCounts

indexify

indexify

compact

unindexify

recomputeIndices

reverse

getUseCoordIndexOnly

setUseCoordIndexOnly

getGeometryArray

getGeometryArray

getIndexedGeometryArray

getIndexedGeometryArray

getIndexedGeometryArray