Package com.jogamp.opengl.awt

Class GLJPanel

java.lang.Object

java.awt.Component

java.awt.Container

javax.swing.JComponent

javax.swing.JPanel

com.jogamp.opengl.awt.GLJPanel

All Implemented Interfaces:

AWTPrintLifecycle, NativeSurfaceHolder, ScalableSurface, WindowClosingProtocol, AWTGLAutoDrawable, ComponentEvents, GLAutoDrawable, GLDrawable, GLSharedContextSetter, ImageObserver, MenuContainer, Serializable, Accessible

public class GLJPanel
extends JPanel
implements AWTGLAutoDrawable, WindowClosingProtocol, AWTPrintLifecycle, GLSharedContextSetter, ScalableSurface

A lightweight Swing component which provides OpenGL rendering support. Provided for compatibility with Swing user interfaces when adding a heavyweight doesn't work either because of Z-ordering or LayoutManager problems.

The GLJPanel can be made transparent by creating it with a GLCapabilities object with alpha bits specified and calling setOpaque(boolean)(false). Pixels with resulting OpenGL alpha values less than 1.0 will be overlaid on any underlying Swing rendering.

This component attempts to use hardware-accelerated rendering via FBO or pbuffers and falls back on to software rendering if none of the former are available using GLDrawableFactory.createOffscreenDrawable(..).

A vertical-flip is required, if the drawable isGLOriented() and vertical flip is not skipped.
In this case this component performs the required vertical flip to bring the content from OpenGL's orientation into AWT's orientation.
In case GLSL based vertical-flip is not available, the CPU intensive System.arraycopy(..) is used line by line. See details about FBO and GLSL vertical flipping.

For performance reasons, as well as for GL state sideeffects, skipping vertical flip is highly recommended!

The OpenGL path is concluded by copying the rendered pixels an BufferedImage via glReadPixels(..) for later Java2D composition.

Finally the Java2D compositioning takes place via via Graphics.drawImage(...) on the prepared BufferedImage as described above.

Please read Java2D OpenGL Remarks.

FBO / GLSL Vertical Flip

If vertical flip is required, FBO is used, GLSL is available and vertical flip is not skipped, a fragment shader is utilized to flip the FBO texture vertically. This hardware-accelerated step can be disabled via system property jogl.gljpanel.noglsl.

The FBO / GLSL code path uses one texture-unit and binds the FBO texture to it's active texture-target, see setTextureUnit(int) and getTextureUnit().

The active and dedicated texture-unit's GL.GL_TEXTURE_2D state is preserved via TextureState. See also Order of Texture Commands.

The current gl-viewport is preserved.

Warning (Bug 842): Certain GL states other than viewport and texture (see above) influencing rendering, will also influence the GLSL vertical flip, e.g. glFrontFace(GL.GL_CCW). It is recommended to reset those states to default when leaving the GLEventListener.display(GLAutoDrawable) method! We may change this behavior in the future, i.e. preserve all influencing states.

OpenGL Context Sharing

To share a GLContext see the following note in the documentation overview: context sharing as well as GLSharedContextSetter.

See Also:

Serialized Form

Nested Class Summary

Nested classes/interfaces inherited from class javax.swing.JComponent

JComponent.AccessibleJComponent

Nested classes/interfaces inherited from class java.awt.Component

Component.BaselineResizeBehavior

Nested classes/interfaces inherited from interface com.jogamp.nativewindow.awt.AWTPrintLifecycle

AWTPrintLifecycle.Context

Nested classes/interfaces inherited from interface com.jogamp.nativewindow.WindowClosingProtocol

WindowClosingProtocol.WindowClosingMode

Field Summary

Fields inherited from class javax.swing.JComponent

TOOL_TIP_TEXT_KEY, UNDEFINED_CONDITION, WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, WHEN_FOCUSED, WHEN_IN_FOCUSED_WINDOW

Fields inherited from class java.awt.Component

BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT

Fields inherited from interface com.jogamp.nativewindow.awt.AWTPrintLifecycle

DEFAULT_PRINT_TILE_SIZE

Fields inherited from interface com.jogamp.opengl.GLAutoDrawable

SCREEN_CHANGE_ACTION_ENABLED

Fields inherited from interface java.awt.image.ImageObserver

ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

Fields inherited from interface com.jogamp.nativewindow.ScalableSurface

AUTOMAX_PIXELSCALE, IDENTITY_PIXELSCALE

Constructor Summary

Constructors

Constructor	Description
GLJPanel()	Creates a new GLJPanel component with a default set of OpenGL capabilities and using the default OpenGL capabilities selection mechanism.
GLJPanel(GLCapabilitiesImmutable userCapsRequest)	Creates a new GLJPanel component with the requested set of OpenGL capabilities, using the default OpenGL capabilities selection mechanism.
GLJPanel(GLCapabilitiesImmutable userCapsRequest, GLCapabilitiesChooser chooser)	Creates a new GLJPanel component.

Method Summary

Modifier and Type	Method	Description
void	addGLEventListener(int index, GLEventListener listener)	Adds the given listener at the given index of this drawable queue.
void	addGLEventListener(GLEventListener listener)	Adds the given listener to the end of this drawable queue.
void	addNotify()	Overridden to track when this component is added to a container.
boolean	areAllGLEventListenerInitialized()	Returns true if all added GLEventListener are initialized, otherwise false.
boolean	canSetSurfaceScale()	Returns true if ScalableSurface.setSurfaceScale(float[]) is supported, otherwise false.
GLContext	createContext(GLContext shareWith)	Creates a new context for drawing to this drawable that will optionally share buffer objects, textures and other server-side OpenGL objects with the specified GLContext.
void	destroy()	Just an alias for removeNotify
void	display()	Causes OpenGL rendering to be performed for this GLAutoDrawable in the following order: Calling display(..) for all registered GLEventListeners.
GLEventListener	disposeGLEventListener(GLEventListener listener, boolean remove)	Disposes the given listener via dispose(..) if it has been initialized and added to this queue.
void	flushGLRunnables()	Flushes all enqueued GLRunnable of this GLAutoDrawable including notifying waiting executor.
GLAnimatorControl	getAnimator()
boolean	getAutoSwapBufferMode()	Indicates whether automatic buffer swapping is enabled for this drawable.
GLCapabilitiesImmutable	getChosenGLCapabilities()	Fetches the GLCapabilitiesImmutable corresponding to the chosen OpenGL capabilities (pixel format / visual / GLProfile) for this drawable.
GLContext	getContext()	Returns the context associated with this drawable.
int	getContextCreationFlags()
float[]	getCurrentSurfaceScale(float[] result)	Returns the current pixel scale of the associated NativeSurface.
AWTGLPixelBuffer.AWTGLPixelBufferProvider	getCustomPixelBufferProvider()
WindowClosingProtocol.WindowClosingMode	getDefaultCloseOperation()
GLDrawable	getDelegatedDrawable()	If the implementation uses delegation, return the delegated GLDrawable instance, otherwise return this instance.
Thread	getExclusiveContextThread()
GLDrawableFactory	getFactory()	Return the GLDrawableFactory being used to create this instance.
GL	getGL()	Returns the GL pipeline object this GLAutoDrawable uses.
GLEventListener	getGLEventListener(int index)	Returns the GLEventListener at the given index of this drawable queue.
int	getGLEventListenerCount()	Returns the number of GLEventListener of this drawable queue.
boolean	getGLEventListenerInitState(GLEventListener listener)	Retrieves whether the given listener is initialized or not.
GLProfile	getGLProfile()	Fetches the GLProfile for this drawable.
long	getHandle()	Returns the GL drawable handle, guaranteed to be valid after realization and while it's surface is being locked.
float[]	getMaximumSurfaceScale(float[] result)	Returns the maximum pixel scale of the associated NativeSurface.
float[]	getMinimumSurfaceScale(float[] result)	Returns the minimum pixel scale of the associated NativeSurface.
NativeSurface	getNativeSurface()	Returns the associated NativeSurface of this NativeSurfaceHolder.
GLCapabilitiesImmutable	getRequestedGLCapabilities()	Fetches the GLCapabilitiesImmutable corresponding to the user requested OpenGL capabilities (pixel format / visual / GLProfile) for this drawable.
float[]	getRequestedSurfaceScale(float[] result)	Returns the requested pixel scale of the associated NativeSurface.
boolean	getSkipGLOrientationVerticalFlip()	See setSkipGLOrientationVerticalFlip(boolean).
int	getSurfaceHeight()	Returns the height of this GLDrawable's surface client area in pixel units.
int	getSurfaceWidth()	Returns the width of this GLDrawable's surface client area in pixel units.
int	getTextureUnit()	Returns the used texture unit, i.e.
RecursiveLock	getUpstreamLock()	Returns the recursive lock object of the upstream widget to synchronize multithreaded access on top of NativeSurface.lockSurface().
Object	getUpstreamWidget()	Method may return the upstream UI toolkit object holding this GLAutoDrawable instance, if exist.
boolean	initializeBackend(boolean offthread)	Attempts to initialize the backend, if not initialized yet.
boolean	invoke(boolean wait, GLRunnable glRunnable)	Enqueues a one-shot GLRunnable, which will be executed within the next GLAutoDrawable.display() call after all registered GLEventListeners display(GLAutoDrawable) methods have been called.
boolean	invoke(boolean wait, List<GLRunnable> glRunnables)	Extends GLAutoDrawable.invoke(boolean, GLRunnable) functionality allowing to inject a list of GLRunnables.
boolean	isGLOriented()	Returns true if the drawable is rendered in OpenGL's coordinate system, origin at bottom left.
boolean	isRealized()	Returns true if this drawable is realized, otherwise false.
boolean	isThreadGLCapable()	Indicates whether the current thread is capable of performing OpenGL-related work.
void	print(Graphics graphics)
void	releasePrint()	Shall be called after PrinterJob.print().
GLEventListener	removeGLEventListener(GLEventListener listener)	Removes the given listener from this drawable queue.
void	removeNotify()	Overridden to track when this component is removed from a container.
void	reshape(int x, int y, int width, int height)	Overridden to cause GLDrawableHelper.reshape(com.jogamp.opengl.GLAutoDrawable, int, int, int, int) to be called on all registered GLEventListeners.
void	setAnimator(GLAnimatorControl animatorControl)	Registers the usage of an animator, an GLAnimatorControl implementation.
void	setAutoSwapBufferMode(boolean enable)	Enables or disables automatic buffer swapping for this drawable.
GLContext	setContext(GLContext newCtx, boolean destroyPrevCtx)	Associate the new context, newtCtx, to this auto-drawable.
void	setContextCreationFlags(int flags)
WindowClosingProtocol.WindowClosingMode	setDefaultCloseOperation(WindowClosingProtocol.WindowClosingMode op)
Thread	setExclusiveContextThread(Thread t)	Dedicates this instance's GLContext to the given thread. The thread will exclusively claim the GLContext via GLAutoDrawable.display() and not release it until GLAutoDrawable.destroy() or setExclusiveContextThread(null) has been called.
GL	setGL(GL gl)	Sets the GL pipeline object this GLAutoDrawable uses.
void	setGLEventListenerInitState(GLEventListener listener, boolean initialized)	Sets the given listener's initialized state.
void	setOpaque(boolean opaque)
void	setPixelBufferProvider(AWTGLPixelBuffer.AWTGLPixelBufferProvider custom)
void	setRealized(boolean realized)	Indicates to GLDrawable implementations whether the underlying surface has been created and can be drawn into.
void	setRequestedGLCapabilities(GLCapabilitiesImmutable caps)	Set a new requested GLCapabilitiesImmutable for this GLJPanel allowing reconfiguration.
void	setSharedAutoDrawable(GLAutoDrawable sharedAutoDrawable)	Specifies an GLAutoDrawable, which OpenGL context shall be shared by this GLAutoDrawable's GLContext.
void	setSharedContext(GLContext sharedContext)	Specifies an OpenGL context, which shall be shared by this GLAutoDrawable's GLContext.
void	setSkipGLOrientationVerticalFlip(boolean v)	Skip isGLOriented() based vertical flip, which usually is required by the offscreen backend, see details about vertical flip and FBO / GLSL vertical flip.
boolean	setSurfaceScale(float[] pixelScale)	Request a pixel scale in x- and y-direction for the associated NativeSurface, where size_in_pixel_units = pixel_scale * size_in_window_units.
void	setTextureUnit(int v)	Allows user to request a texture unit to be used, must be called before the first initialization, i.e.
void	setupPrint(double scaleMatX, double scaleMatY, int numSamples, int tileWidth, int tileHeight)	Shall be called before PrinterJob.print().
boolean	shouldPreserveColorBufferIfTranslucent()	For a translucent GLJPanel (one for which setOpaque(false) has been called), indicates whether the application should preserve the OpenGL color buffer (GL_COLOR_BUFFER_BIT) for correct rendering of the GLJPanel and underlying widgets which may show through portions of the GLJPanel with alpha values less than 1.
void	swapBuffers()	Swaps the front and back buffers of this drawable.
String	toString()

Methods inherited from class javax.swing.JPanel

getAccessibleContext, getUI, getUIClassID, setUI, updateUI

Methods inherited from class javax.swing.JComponent

addAncestorListener, addVetoableChangeListener, computeVisibleRect, contains, createToolTip, disable, enable, firePropertyChange, firePropertyChange, firePropertyChange, getActionForKeyStroke, getActionMap, getAlignmentX, getAlignmentY, getAncestorListeners, getAutoscrolls, getBaseline, getBaselineResizeBehavior, getBorder, getBounds, getClientProperty, getComponentPopupMenu, getConditionForKeyStroke, getDebugGraphicsOptions, getDefaultLocale, getFontMetrics, getGraphics, getHeight, getInheritsPopupMenu, getInputMap, getInputMap, getInputVerifier, getInsets, getInsets, getListeners, getLocation, getMaximumSize, getMinimumSize, getNextFocusableComponent, getPopupLocation, getPreferredSize, getRegisteredKeyStrokes, getRootPane, getSize, getToolTipLocation, getToolTipText, getToolTipText, getTopLevelAncestor, getTransferHandler, getVerifyInputWhenFocusTarget, getVetoableChangeListeners, getVisibleRect, getWidth, getX, getY, grabFocus, hide, isDoubleBuffered, isLightweightComponent, isManagingFocus, isOpaque, isOptimizedDrawingEnabled, isPaintingForPrint, isPaintingTile, isRequestFocusEnabled, isValidateRoot, paint, paintImmediately, paintImmediately, printAll, putClientProperty, registerKeyboardAction, registerKeyboardAction, removeAncestorListener, removeVetoableChangeListener, repaint, repaint, requestDefaultFocus, requestFocus, requestFocus, requestFocusInWindow, resetKeyboardActions, revalidate, scrollRectToVisible, setActionMap, setAlignmentX, setAlignmentY, setAutoscrolls, setBackground, setBorder, setComponentPopupMenu, setDebugGraphicsOptions, setDefaultLocale, setDoubleBuffered, setEnabled, setFocusTraversalKeys, setFont, setForeground, setInheritsPopupMenu, setInputMap, setInputVerifier, setMaximumSize, setMinimumSize, setNextFocusableComponent, setPreferredSize, setRequestFocusEnabled, setToolTipText, setTransferHandler, setVerifyInputWhenFocusTarget, setVisible, unregisterKeyboardAction, update

Methods inherited from class java.awt.Container

add, add, add, add, add, addContainerListener, addPropertyChangeListener, addPropertyChangeListener, applyComponentOrientation, areFocusTraversalKeysSet, countComponents, deliverEvent, doLayout, findComponentAt, findComponentAt, getComponent, getComponentAt, getComponentAt, getComponentCount, getComponents, getComponentZOrder, getContainerListeners, getFocusTraversalKeys, getFocusTraversalPolicy, getLayout, getMousePosition, insets, invalidate, isAncestorOf, isFocusCycleRoot, isFocusCycleRoot, isFocusTraversalPolicyProvider, isFocusTraversalPolicySet, layout, list, list, locate, minimumSize, paintComponents, preferredSize, printComponents, remove, remove, removeAll, removeContainerListener, setComponentZOrder, setFocusCycleRoot, setFocusTraversalPolicy, setFocusTraversalPolicyProvider, setLayout, transferFocusDownCycle, validate

Methods inherited from class java.awt.Component

action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, bounds, checkImage, checkImage, contains, createImage, createImage, createVolatileImage, createVolatileImage, dispatchEvent, enable, enableInputMethods, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, getBackground, getBounds, getColorModel, getComponentListeners, getComponentOrientation, getCursor, getDropTarget, getFocusCycleRootAncestor, getFocusListeners, getFocusTraversalKeysEnabled, getFont, getForeground, getGraphicsConfiguration, getHierarchyBoundsListeners, getHierarchyListeners, getIgnoreRepaint, getInputContext, getInputMethodListeners, getInputMethodRequests, getKeyListeners, getLocale, getLocation, getLocationOnScreen, getMouseListeners, getMouseMotionListeners, getMousePosition, getMouseWheelListeners, getName, getParent, getPropertyChangeListeners, getPropertyChangeListeners, getSize, getToolkit, getTreeLock, gotFocus, handleEvent, hasFocus, imageUpdate, inside, isBackgroundSet, isCursorSet, isDisplayable, isEnabled, isFocusable, isFocusOwner, isFocusTraversable, isFontSet, isForegroundSet, isLightweight, isMaximumSizeSet, isMinimumSizeSet, isPreferredSizeSet, isShowing, isValid, isVisible, keyDown, keyUp, list, list, list, location, lostFocus, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, postEvent, prepareImage, prepareImage, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener, repaint, repaint, repaint, requestFocus, requestFocusInWindow, resize, resize, setBounds, setBounds, setComponentOrientation, setCursor, setDropTarget, setFocusable, setFocusTraversalKeysEnabled, setIgnoreRepaint, setLocale, setLocation, setLocation, setMixingCutoutShape, setName, setSize, setSize, show, show, size, transferFocus, transferFocusBackward, transferFocusUpCycle

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface com.jogamp.opengl.awt.AWTGLAutoDrawable

repaint, setSize

Methods inherited from interface com.jogamp.opengl.awt.ComponentEvents

addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, addPropertyChangeListener, addPropertyChangeListener, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener

Constructor Detail

GLJPanel

public GLJPanel()
         throws GLException

Creates a new GLJPanel component with a default set of OpenGL capabilities and using the default OpenGL capabilities selection mechanism.

See details about OpenGL context sharing.

Throws:

GLException - if no default profile is available for the default desktop device.

GLJPanel

public GLJPanel(GLCapabilitiesImmutable userCapsRequest)
         throws GLException

Creates a new GLJPanel component with the requested set of OpenGL capabilities, using the default OpenGL capabilities selection mechanism.

See details about OpenGL context sharing.

Throws:

GLException - if no GLCapabilities are given and no default profile is available for the default desktop device.

GLJPanel

public GLJPanel(GLCapabilitiesImmutable userCapsRequest,
                GLCapabilitiesChooser chooser)
         throws GLException

Creates a new GLJPanel component. The passed GLCapabilities specifies the OpenGL capabilities for the component; if null, a default set of capabilities is used. The GLCapabilitiesChooser specifies the algorithm for selecting one of the available GLCapabilities for the component; a DefaultGLCapabilitesChooser is used if null is passed for this argument.

See details about OpenGL context sharing.

Throws:

GLException - if no GLCapabilities are given and no default profile is available for the default desktop device.

Method Detail

initializeBackend

public final boolean initializeBackend(boolean offthread)

Attempts to initialize the backend, if not initialized yet.

If backend is already initialized method returns true.

If offthread is true, initialization will kicked off on a short lived arbitrary thread and method returns immediately.
If platform supports such arbitrary thread initialization method returns true, otherwise false.

If offthread is false, initialization be performed on the current thread and method returns after initialization.
Method returns true if initialization was successful, otherwise false.

Parameters:

offthread -

setSharedContext

public final void setSharedContext(GLContext sharedContext)
                            throws IllegalStateException

Description copied from interface: GLSharedContextSetter

Specifies an OpenGL context, which shall be shared by this GLAutoDrawable's GLContext.

Since the drawable and context is created at GLAutoDrawable initialization this method shall be called beforehand to have any effect.

A set sharedContext will block context creation, i.e. GLAutoDrawable initialization, as long it is not created natively.

The preferred method of assigning a shared context is to set the shared GLAutoDrawable, since this method also takes the GLEventListener initialization into account.

See Lifecycle Considerations.

Specified by:

setSharedContext in interface GLSharedContextSetter

Parameters:

sharedContext - The OpenGL context to be shared by this GLAutoDrawable's GLContext.

Throws:

IllegalStateException - if a shared GLContext or shared GLAutoDrawable is already set, the given sharedContext is null or equal to this GLAutoDrawable's context.

See Also:

GLSharedContextSetter.setSharedAutoDrawable(GLAutoDrawable)

setSharedAutoDrawable

public final void setSharedAutoDrawable(GLAutoDrawable sharedAutoDrawable)
                                 throws IllegalStateException

Description copied from interface: GLSharedContextSetter

Specifies an GLAutoDrawable, which OpenGL context shall be shared by this GLAutoDrawable's GLContext.

Since the drawable and context is created at GLAutoDrawable initialization this method shall be called beforehand to have any effect.

A set sharedAutoDrawable will block context creation, i.e. initialization as long it's

• GLContext is null, or
• GLContext has not been created natively, or
• GLEventListener are not completely initialized

See Lifecycle Considerations.

Specified by:

setSharedAutoDrawable in interface GLSharedContextSetter

Throws:

IllegalStateException - if a shared GLContext or shared GLAutoDrawable is already set, the given sharedAutoDrawable is null or equal to this GLAutoDrawable.

See Also:

GLSharedContextSetter.setSharedContext(GLContext)

getCustomPixelBufferProvider

public AWTGLPixelBuffer.AWTGLPixelBufferProvider getCustomPixelBufferProvider()

setPixelBufferProvider

public void setPixelBufferProvider(AWTGLPixelBuffer.AWTGLPixelBufferProvider custom)
                            throws IllegalArgumentException,
                                   IllegalStateException

Parameters:

custom - custom AWTGLPixelBuffer.AWTGLPixelBufferProvider

Throws:

IllegalArgumentException - if custom is null

IllegalStateException - if backend is already realized, i.e. this instanced already painted once.

getUpstreamWidget

public final Object getUpstreamWidget()

Description copied from interface: GLAutoDrawable

Method may return the upstream UI toolkit object holding this GLAutoDrawable instance, if exist.

Currently known Java UI toolkits and it's known return types are:

Toolkit	GLAutoDrawable Implementation	~	Return Type of getUpstreamWidget()
NEWT	GLWindow	has a	Window
SWT	GLCanvas	is a	Canvas
AWT	GLCanvas	is a	Canvas
AWT	GLJPanel	is a	JPanel

However, the result may be other object types than the listed above due to new supported toolkits.

This method may also return null if no UI toolkit is being used, as common for offscreen rendering.

Specified by:

getUpstreamWidget in interface GLAutoDrawable

getUpstreamLock

public final RecursiveLock getUpstreamLock()

Description copied from interface: GLAutoDrawable

Returns the recursive lock object of the upstream widget to synchronize multithreaded access on top of NativeSurface.lockSurface().

See GLAutoDrawable Locking.

Specified by:

getUpstreamLock in interface GLAutoDrawable

isThreadGLCapable

public final boolean isThreadGLCapable()

Description copied from interface: GLAutoDrawable

Indicates whether the current thread is capable of performing OpenGL-related work.

Implementation utilizes this knowledge to determine whether GLAutoDrawable.display() performs the OpenGL commands on the current thread directly or spawns them on the dedicated OpenGL thread.

Specified by:

isThreadGLCapable in interface GLAutoDrawable

display

public void display()

Description copied from interface: GLAutoDrawable

Causes OpenGL rendering to be performed for this GLAutoDrawable in the following order:

• Calling display(..) for all registered GLEventListeners.
• Executes all one-shot GLRunnable, enqueued via GLAutoDrawable.invoke(boolean, GLRunnable).

May be called periodically by a running GLAnimatorControl implementation,
which must register itself with GLAutoDrawable.setAnimator(com.jogamp.opengl.GLAnimatorControl).

Called automatically by the window system toolkit upon receiving a repaint() request,
except an GLAnimatorControl implementation GLAnimatorControl.isAnimating().

This routine may also be called manually for better control over the rendering process. It is legal to call another GLAutoDrawable's display method from within the display(..) callback.

In case of a new generated OpenGL context, the implementation shall call init(..) for all registered GLEventListeners before making the actual display(..) calls, in case this has not been done yet.

Specified by:

display in interface GLAutoDrawable

See Also:

GLAutoDrawable.setAnimator(com.jogamp.opengl.GLAnimatorControl)

destroy

public void destroy()

Just an alias for removeNotify

Specified by:

destroy in interface GLAutoDrawable

canSetSurfaceScale

public final boolean canSetSurfaceScale()

Returns true if ScalableSurface.setSurfaceScale(float[]) is supported, otherwise false.

For pure downstream scalable surfaces like AWT widgets, setting the picel scale is not supported since the pixel scale is set by the underlying toolkit.

This implementation returns false, i.e. not supporting manual change of pixel-scale.

Specified by:

canSetSurfaceScale in interface ScalableSurface

setSurfaceScale

public final boolean setSurfaceScale(float[] pixelScale)

Request a pixel scale in x- and y-direction for the associated NativeSurface, where size_in_pixel_units = pixel_scale * size_in_window_units.

Default pixel scale request for both directions is ScalableSurface.AUTOMAX_PIXELSCALE.

If ScalableSurface.canSetSurfaceScale() returns false, requested pixel scale is ScalableSurface.AUTOMAX_PIXELSCALE, immutable and method returns false.

In case platform only supports uniform pixel scale, i.e. one scale for both directions, either ScalableSurface.AUTOMAX_PIXELSCALE or the maximum requested pixel scale component is used.

The requested pixel scale will be validated against platform limits before native scale-setup, i.e. clipped to ScalableSurface.IDENTITY_PIXELSCALE if not supported or clipped to the platform maximum. It can be queried via ScalableSurface.getRequestedSurfaceScale(float[]).

The actual realized pixel scale values of the NativeSurface can be queried via ScalableSurface.getCurrentSurfaceScale(float[]) or computed via surface.convertToPixelUnits(new int[] { 1, 1 })

Ignored for an AWT widget since pixelScale is dictated by AWT mechanisms.

Specified by:

setSurfaceScale in interface ScalableSurface

Parameters:

pixelScale - requested surface pixel scale float[2] values for x- and y-direction.

Returns:

true if the current pixel scale has changed, otherwise false.

See Also:

ScalableSurface.getRequestedSurfaceScale(float[]), ScalableSurface.canSetSurfaceScale()

getRequestedSurfaceScale

public final float[] getRequestedSurfaceScale(float[] result)

Returns the requested pixel scale of the associated NativeSurface.

If ScalableSurface.canSetSurfaceScale() returns false, requested pixel scale is ScalableSurface.AUTOMAX_PIXELSCALE and immutable.

Returns ScalableSurface.AUTOMAX_PIXELSCALE, always.

Specified by:

getRequestedSurfaceScale in interface ScalableSurface

Parameters:

result - float[2] storage for the result

Returns:

the passed storage containing the current pixelScale for chaining

See Also:

ScalableSurface.setSurfaceScale(float[]), ScalableSurface.canSetSurfaceScale()

getCurrentSurfaceScale

public final float[] getCurrentSurfaceScale(float[] result)

Description copied from interface: com.jogamp.nativewindow.ScalableSurface

Returns the current pixel scale of the associated NativeSurface.

Specified by:

getCurrentSurfaceScale in interface ScalableSurface

Parameters:

result - float[2] storage for the result

Returns:

the passed storage containing the current pixelScale for chaining

getMinimumSurfaceScale

public float[] getMinimumSurfaceScale(float[] result)

Returns the minimum pixel scale of the associated NativeSurface.

Returns 1.0, always.

Specified by:

getMinimumSurfaceScale in interface ScalableSurface

Parameters:

result - float[2] storage for the result

Returns:

the passed storage containing the minimum pixelScale for chaining

getMaximumSurfaceScale

public float[] getMaximumSurfaceScale(float[] result)

Returns the maximum pixel scale of the associated NativeSurface.

The maximum pixel scale maybe used to determine the proper dpi value of the monitor displaying this NativeSurface.

    surfacePpMM = monitorPpMM * currentSurfaceScale / nativeSurfaceScale,
    with PpMM == pixel per millimeter
 

Returns getCurrentSurfaceScale(float[]).

Specified by:

getMaximumSurfaceScale in interface ScalableSurface

Parameters:

result - float[2] storage for the result

Returns:

the passed storage containing the maximum pixelScale for chaining

addNotify

public void addNotify()

Overridden to track when this component is added to a container. Subclasses which override this method must call super.addNotify() in their addNotify() method in order to function properly.

addNotify in class java.awt.Component

Overrides:

addNotify in class JComponent

removeNotify

public void removeNotify()

Overridden to track when this component is removed from a container. Subclasses which override this method must call super.removeNotify() in their removeNotify() method in order to function properly.

removeNotify in class java.awt.Component

Overrides:

removeNotify in class JComponent

reshape

public void reshape(int x,
                    int y,
                    int width,
                    int height)

Overridden to cause GLDrawableHelper.reshape(com.jogamp.opengl.GLAutoDrawable, int, int, int, int) to be called on all registered GLEventListeners. Subclasses which override this method must call super.reshape() in their reshape() method in order to function properly.

Overrides:

reshape in class JComponent

setupPrint

public void setupPrint(double scaleMatX,
                       double scaleMatY,
                       int numSamples,
                       int tileWidth,
                       int tileHeight)

Description copied from interface: com.jogamp.nativewindow.awt.AWTPrintLifecycle

Shall be called before PrinterJob.print().

See Usage.

Specified by:

setupPrint in interface AWTPrintLifecycle

Parameters:

scaleMatX - Graphics2D scaling factor, i.e. rendering 1/scaleMatX * width pixels

scaleMatY - Graphics2D scaling factor, i.e. rendering 1/scaleMatY * height pixels

numSamples - multisampling value: < 0 turns off, == 0 leaves as-is, > 0 enables using given num samples

tileWidth - custom tile width for tile renderer, pass -1 for default.

tileHeight - custom tile height for tile renderer, pass -1 for default. FIXME: Add border size !

releasePrint

public void releasePrint()

Description copied from interface: com.jogamp.nativewindow.awt.AWTPrintLifecycle

Shall be called after PrinterJob.print().

See Usage.

Specified by:

releasePrint in interface AWTPrintLifecycle

print

public void print(Graphics graphics)

Overrides:

print in class JComponent

setOpaque

public void setOpaque(boolean opaque)

Overrides:

setOpaque in class JComponent

addGLEventListener

public void addGLEventListener(GLEventListener listener)

Description copied from interface: GLAutoDrawable

Adds the given listener to the end of this drawable queue. The listeners are notified of events in the order of the queue.

The newly added listener's init(..) method will be called once before any other of it's callback methods. See GLAutoDrawable.getGLEventListenerInitState(GLEventListener) for details.

Specified by:

addGLEventListener in interface GLAutoDrawable

Parameters:

listener - The GLEventListener object to be inserted

addGLEventListener

public void addGLEventListener(int index,
                               GLEventListener listener)

Description copied from interface: GLAutoDrawable

Adds the given listener at the given index of this drawable queue. The listeners are notified of events in the order of the queue.

The newly added listener's init(..) method will be called once before any other of it's callback methods. See GLAutoDrawable.getGLEventListenerInitState(GLEventListener) for details.

Specified by:

addGLEventListener in interface GLAutoDrawable

Parameters:

index - Position where the listener will be inserted. Should be within (0 <= index && index <= size()). An index value of -1 is interpreted as the end of the list, size().

listener - The GLEventListener object to be inserted

getGLEventListenerCount

public int getGLEventListenerCount()

Description copied from interface: GLAutoDrawable

Returns the number of GLEventListener of this drawable queue.

Specified by:

getGLEventListenerCount in interface GLAutoDrawable

Returns:

The number of GLEventListener objects of this drawable queue.

getGLEventListener

public GLEventListener getGLEventListener(int index)
                                   throws IndexOutOfBoundsException

Description copied from interface: GLAutoDrawable

Returns the GLEventListener at the given index of this drawable queue.

Specified by:

getGLEventListener in interface GLAutoDrawable

Parameters:

index - Position of the listener to be returned. Should be within (0 <= index && index < size()). An index value of -1 is interpreted as last listener, size()-1.

Returns:

The GLEventListener object at the given index.

Throws:

IndexOutOfBoundsException - If the index is not within (0 <= index && index < size()), or -1

areAllGLEventListenerInitialized

public boolean areAllGLEventListenerInitialized()

Description copied from interface: GLAutoDrawable

Returns true if all added GLEventListener are initialized, otherwise false.

Specified by:

areAllGLEventListenerInitialized in interface GLAutoDrawable

getGLEventListenerInitState

public boolean getGLEventListenerInitState(GLEventListener listener)

Description copied from interface: GLAutoDrawable

Retrieves whether the given listener is initialized or not.

After adding a GLEventListener it is marked uninitialized and added to a list of to be initialized GLEventListener. If such uninitialized GLEventListener's handler methods (reshape, display) are about to be invoked, it's init(..) method is invoked first. Afterwards the GLEventListener is marked initialized and removed from the list of to be initialized GLEventListener.

This methods returns the GLEventListener initialized state, i.e. returns false if it is included in the list of to be initialized GLEventListener, otherwise true.

Specified by:

getGLEventListenerInitState in interface GLAutoDrawable

Parameters:

listener - the GLEventListener object to query it's initialized state.

setGLEventListenerInitState

public void setGLEventListenerInitState(GLEventListener listener,
                                        boolean initialized)

Description copied from interface: GLAutoDrawable

Sets the given listener's initialized state.

This methods allows manually setting the GLEventListener initialized state, i.e. adding it to, or removing it from the list of to be initialized GLEventListener. See GLAutoDrawable.getGLEventListenerInitState(GLEventListener) for details.

Warning: This method does not validate whether the given listener's is member of this drawable queue, i.e. added.

This method is only exposed to allow users full control over the GLEventListener's state and is usually not recommended to change.

One use case is moving a GLContext and their initialized GLEventListener from one GLAutoDrawable to another, where a subsequent init(..) call after adding it to the new owner is neither required nor desired. See swapGLContextAndAllGLEventListener(..).

Specified by:

setGLEventListenerInitState in interface GLAutoDrawable

Parameters:

listener - the GLEventListener object to perform a state change.

initialized - if true, mark the listener initialized, otherwise uninitialized.

disposeGLEventListener

public GLEventListener disposeGLEventListener(GLEventListener listener,
                                              boolean remove)

Description copied from interface: GLAutoDrawable

Disposes the given listener via dispose(..) if it has been initialized and added to this queue.

If remove is true, the GLEventListener is removed from this drawable queue before disposal, otherwise marked uninitialized.

If an GLAnimatorControl is being attached and the current thread is different than the animator's thread, it is paused during the operation.

Note that this is an expensive operation, since dispose(..) is decorated by GLContext.makeCurrent() and GLContext.release().

Use removeGLEventListener(listener) instead if you just want to remove the listener and don't care about the disposal of the it's (OpenGL) resources.

Also note that this is done from within a particular drawable's GLEventListener handler (reshape, display, etc.), that it is not guaranteed that all other listeners will be evaluated properly during this update cycle.

Specified by:

disposeGLEventListener in interface GLAutoDrawable

Parameters:

listener - The GLEventListener object to be disposed and removed if remove is true

remove - pass true to have the listener removed from this drawable queue, otherwise pass false

Returns:

the disposed and/or removed GLEventListener, or null if no action was performed, i.e. listener was not added

removeGLEventListener

public GLEventListener removeGLEventListener(GLEventListener listener)

Description copied from interface: GLAutoDrawable

Removes the given listener from this drawable queue.

This is an inexpensive operation, since the removed listener's dispose(..) method will not be called.

Use disposeGLEventListener(listener, true) instead to ensure disposal of the listener's (OpenGL) resources.

Note that if this is done from within a particular drawable's GLEventListener handler (reshape, display, etc.), that it is not guaranteed that all other listeners will be evaluated properly during this update cycle.

Specified by:

removeGLEventListener in interface GLAutoDrawable

Parameters:

listener - The GLEventListener object to be removed

Returns:

the removed GLEventListener, or null if listener was not added

setAnimator

public void setAnimator(GLAnimatorControl animatorControl)

Description copied from interface: GLAutoDrawable

Registers the usage of an animator, an GLAnimatorControl implementation. The animator will be queried whether it's animating, ie periodically issuing GLAutoDrawable.display() calls or not.

This method shall be called by an animator implementation only,
e.g. AnimatorBase.add(com.jogamp.opengl.GLAutoDrawable), passing it's control implementation,
and AnimatorBase.remove(com.jogamp.opengl.GLAutoDrawable), passing null.

Impacts GLAutoDrawable.display() and GLAutoDrawable.invoke(boolean, GLRunnable) semantics.

Specified by:

setAnimator in interface GLAutoDrawable

Parameters:

animatorControl - null reference indicates no animator is using this GLAutoDrawable,
a valid reference indicates an animator is using this GLAutoDrawable.

See Also:

GLAutoDrawable.display(), GLAutoDrawable.invoke(boolean, GLRunnable), GLAnimatorControl

getAnimator

public GLAnimatorControl getAnimator()

Specified by:

getAnimator in interface GLAutoDrawable

Returns:

the registered GLAnimatorControl implementation, using this GLAutoDrawable.

See Also:

GLAutoDrawable.setAnimator(com.jogamp.opengl.GLAnimatorControl), GLAnimatorControl

setExclusiveContextThread

public final Thread setExclusiveContextThread(Thread t)
                                       throws GLException

Description copied from interface: GLAutoDrawable

Dedicates this instance's GLContext to the given thread.
The thread will exclusively claim the GLContext via GLAutoDrawable.display() and not release it until GLAutoDrawable.destroy() or setExclusiveContextThread(null) has been called.

Default non-exclusive behavior is requested via setExclusiveContextThread(null), which will cause the next call of GLAutoDrawable.display() on the exclusive thread to release the GLContext. Only after it's async release, GLAutoDrawable.getExclusiveContextThread() will return null.

To release a previous made exclusive thread, a user issues setExclusiveContextThread(null) and may poll GLAutoDrawable.getExclusiveContextThread() until it returns null, while the exclusive thread is still running.

Note: Setting a new exclusive thread without properly releasing a previous one will throw an GLException.

Note: Utilizing this feature w/ AWT could lead to an AWT-EDT deadlock, depending on the AWT implementation. Hence it is advised not to use it with native AWT GLAutoDrawable like GLCanvas.

One scenario could be to dedicate the context to the animator thread and spare redundant context switches, see AnimatorBase.setExclusiveContext(boolean).

Specified by:

setExclusiveContextThread in interface GLAutoDrawable

Parameters:

t - the exclusive thread to claim the context, or null for default operation.

Returns:

previous exclusive context thread

Throws:

GLException - If an exclusive thread is still active but a new one is attempted to be set

See Also:

AnimatorBase.setExclusiveContext(boolean)

getExclusiveContextThread

public final Thread getExclusiveContextThread()

Specified by:

getExclusiveContextThread in interface GLAutoDrawable

See Also:

GLAutoDrawable.setExclusiveContextThread(Thread)

invoke

public boolean invoke(boolean wait,
                      GLRunnable glRunnable)
               throws IllegalStateException

Description copied from interface: GLAutoDrawable

Enqueues a one-shot GLRunnable, which will be executed within the next GLAutoDrawable.display() call after all registered GLEventListeners display(GLAutoDrawable) methods have been called.

The given GLRunnable.run(GLAutoDrawable) shall return true to indicate that the GL [back] framebuffer remains intact by this runnable.
If returning false GLAutoDrawable will call display(GLAutoDrawable) of all registered GLEventListeners once more to reinstate the framebuffer.

If no GLAnimatorControl is animating (default),
or if the current thread is the animator thread,
a GLAutoDrawable.display() call is issued after enqueue the GLRunnable, hence the GLRunnable will be executed right away.

If an animator is running,
no explicit GLAutoDrawable.display() call is issued, allowing the animator to perform at due time.

If wait is true the call blocks until the glRunnable has been executed by the animator, otherwise the method returns immediately.

If wait is true and GLDrawable.isRealized() returns false or GLAutoDrawable.getContext() returns null, the call is ignored and returns false.
This helps avoiding deadlocking the caller.

The internal queue of GLRunnable's is being flushed with GLAutoDrawable.destroy() where all blocked callers are being notified.

To avoid a deadlock situation which causes an IllegalStateException one should avoid issuing invoke while this GLAutoDrawable is being locked.
Detected deadlock situations throwing an IllegalStateException are:

• Animator is running on another thread and waiting and is locked on current thread, but is not GL-Thread
• No Animator is running on another thread and is locked on current thread, but is not GL-Thread

Specified by:

invoke in interface GLAutoDrawable

Parameters:

wait - if true block until execution of glRunnable is finished, otherwise return immediately w/o waiting

glRunnable - the GLRunnable to execute within GLAutoDrawable.display()

Returns:

true if the GLRunnable has been processed or queued, otherwise false.

Throws:

IllegalStateException - in case of a detected deadlock situation ahead, see above.

See Also:

GLAutoDrawable.setAnimator(GLAnimatorControl), GLAutoDrawable.display(), GLRunnable, GLAutoDrawable.invoke(boolean, List), GLAutoDrawable.flushGLRunnables()

invoke

public boolean invoke(boolean wait,
                      List<GLRunnable> glRunnables)
               throws IllegalStateException

Description copied from interface: GLAutoDrawable

Extends GLAutoDrawable.invoke(boolean, GLRunnable) functionality allowing to inject a list of GLRunnables.

Specified by:

invoke in interface GLAutoDrawable

Parameters:

wait - if true block until execution of the last glRunnable is finished, otherwise return immediately w/o waiting

glRunnables - the GLRunnables to execute within GLAutoDrawable.display()

Returns:

true if the GLRunnables has been processed or queued, otherwise false.

Throws:

IllegalStateException - in case of a detected deadlock situation ahead, see GLAutoDrawable.invoke(boolean, GLRunnable).

See Also:

GLAutoDrawable.invoke(boolean, GLRunnable), GLAutoDrawable.flushGLRunnables()

flushGLRunnables

public void flushGLRunnables()

Description copied from interface: GLAutoDrawable

Flushes all enqueued GLRunnable of this GLAutoDrawable including notifying waiting executor.

The executor which might have been blocked until notified will be unblocked and all tasks removed from the queue.

Specified by:

flushGLRunnables in interface GLAutoDrawable

See Also:

GLAutoDrawable.invoke(boolean, GLRunnable)

createContext

public GLContext createContext(GLContext shareWith)

Description copied from interface: GLAutoDrawable

Creates a new context for drawing to this drawable that will optionally share buffer objects, textures and other server-side OpenGL objects with the specified GLContext.

The GLContext share need not be associated with this GLDrawable and may be null if sharing of display lists and other objects is not desired. See the note in the overview documentation context sharing as well as GLSharedContextSetter.

This GLAutoDrawable implementation holds it's own GLContext reference, thus created a GLContext using this methods won't replace it implicitly. To replace or set this GLAutoDrawable's GLContext you need to call GLAutoDrawable.setContext(GLContext, boolean).

The GLAutoDrawable implementation shall also set the context creation flags as customized w/ GLAutoDrawable.setContextCreationFlags(int).

Specified by:

createContext in interface GLAutoDrawable

Specified by:

createContext in interface GLDrawable

setRealized

public void setRealized(boolean realized)

Description copied from interface: GLDrawable

Indicates to GLDrawable implementations whether the underlying surface has been created and can be drawn into.

If realized, the drawable handle may become valid while it's surface is being locked.

End users do not need to call this method; it is not necessary to call setRealized on a GLAutoDrawable as these perform the appropriate calls on their underlying GLDrawables internally.

Developers implementing new OpenGL components for various window toolkits need to call this method against GLDrawables obtained from the GLDrawableFactory via the GLDrawableFactory.createGLDrawable(NativeSurface) method. It must typically be called with an argument of true when the component associated with the GLDrawable is realized and with an argument of false just before the component is unrealized. For the AWT, this means calling setRealized(true) in the addNotify method and with an argument of false in the removeNotify method.

GLDrawable implementations should handle multiple cycles of setRealized(true) / setRealized(false) calls. Most, if not all, Java window toolkits have a persistent object associated with a given component, regardless of whether that component is currently realized. The GLDrawable object associated with a particular component is intended to be similarly persistent. A GLDrawable is intended to be created for a given component when it is constructed and live as long as that component. setRealized allows the GLDrawable to re-initialize and destroy any associated resources as the component becomes realized and unrealized, respectively.

With an argument of true, the minimum implementation shall call NativeSurface's lockSurface() and if successful:

• Update the GLCapabilities, which are associated with the attached NativeSurface's AbstractGraphicsConfiguration.
• Release the lock with NativeSurface's unlockSurface().

This is important since NativeSurface's lockSurface() ensures resolving the window/surface handles, and the drawable's GLCapabilities might have changed.

Calling this method has no other effects. For example, if removeNotify is called on a Canvas implementation for which a GLDrawable has been created, it is also necessary to destroy all OpenGL contexts associated with that GLDrawable. This is not done automatically by the implementation.

Specified by:

setRealized in interface GLDrawable

See Also:

GLDrawable.isRealized(), GLDrawable.getHandle(), NativeSurface.lockSurface()

isRealized

public boolean isRealized()

Description copied from interface: GLDrawable

Returns true if this drawable is realized, otherwise false.

A drawable can be realized and unrealized via GLDrawable.setRealized(boolean).

Specified by:

isRealized in interface GLDrawable

See Also:

GLDrawable.setRealized(boolean)

setContext

public GLContext setContext(GLContext newCtx,
                            boolean destroyPrevCtx)

Description copied from interface: GLAutoDrawable

Associate the new context, newtCtx, to this auto-drawable.

Remarks:

• The currently associated context will be destroyed if destroyPrevCtx is true, otherwise it will be disassociated from this auto-drawable via setGLDrawable(null, true); including glFinish().
• The new context will be associated with this auto-drawable via newCtx.setGLDrawable(drawable, true);.
• If the old context was current on this thread, it is being released after disassociating this auto-drawable.
• If the new context was current on this thread, it is being released before associating this auto-drawable and made current afterwards.
• Implementation may issue GLContext.makeCurrent() and GLContext.release() while drawable reassociation.
• The user shall take extra care of thread synchronization, i.e. lock the involved auto-drawable's upstream-locks and surfaces to avoid a race condition. See GLAutoDrawable Locking.

Specified by:

setContext in interface GLAutoDrawable

Parameters:

newCtx - the new context, maybe null for dis-association.

destroyPrevCtx - if true, destroy the previous context if exists

Returns:

the previous GLContext, maybe null

See Also:

GLContext.setGLDrawable(GLDrawable, boolean), GLContext.setGLReadDrawable(GLDrawable), GLDrawableHelper.switchContext(GLDrawable, GLContext, boolean, GLContext, int)

getDelegatedDrawable

public final GLDrawable getDelegatedDrawable()

Description copied from interface: GLAutoDrawable

If the implementation uses delegation, return the delegated GLDrawable instance, otherwise return this instance.

Specified by:

getDelegatedDrawable in interface GLAutoDrawable

getContext

public GLContext getContext()

Description copied from interface: GLAutoDrawable

Returns the context associated with this drawable. The returned context will be synchronized. Don't rely on it's identity, the context may change.

Specified by:

getContext in interface GLAutoDrawable

getGL

public GL getGL()

Description copied from interface: GLAutoDrawable

Returns the GL pipeline object this GLAutoDrawable uses. If this method is called outside of the GLEventListener's callback methods (init, display, etc.) it may return null. Users should not rely on the identity of the returned GL object; for example, users should not maintain a hash table with the GL object as the key. Additionally, the GL object should not be cached in client code, but should be re-fetched from the GLAutoDrawable at the beginning of each call to init, display, etc.

Specified by:

getGL in interface GLAutoDrawable

setGL

public GL setGL(GL gl)

Description copied from interface: GLAutoDrawable

Sets the GL pipeline object this GLAutoDrawable uses. This should only be called from within the GLEventListener's callback methods, and usually only from within the init() method, in order to install a composable pipeline. See the JOGL demos for examples.

Specified by:

setGL in interface GLAutoDrawable

Returns:

the set GL pipeline or null if not successful

setAutoSwapBufferMode

public void setAutoSwapBufferMode(boolean enable)

Description copied from interface: GLAutoDrawable

Enables or disables automatic buffer swapping for this drawable. By default this property is set to true; when true, after all GLEventListeners have been called for a display() event, the front and back buffers are swapped, displaying the results of the render. When disabled, the user is responsible for calling {@link #swapBuffers(..)} manually.

Specified by:

setAutoSwapBufferMode in interface GLAutoDrawable

getAutoSwapBufferMode

public boolean getAutoSwapBufferMode()

Description copied from interface: GLAutoDrawable

Indicates whether automatic buffer swapping is enabled for this drawable. See GLAutoDrawable.setAutoSwapBufferMode(boolean).

Specified by:

getAutoSwapBufferMode in interface GLAutoDrawable

swapBuffers

public void swapBuffers()

Description copied from interface: GLDrawable

Swaps the front and back buffers of this drawable. For GLAutoDrawable implementations, when automatic buffer swapping is enabled (as is the default), this method is called automatically and should not be called by the end user.

Specified by:

swapBuffers in interface GLDrawable

setContextCreationFlags

public void setContextCreationFlags(int flags)

Specified by:

setContextCreationFlags in interface GLAutoDrawable

Parameters:

flags - Additional context creation flags.

See Also:

GLContext.setContextCreationFlags(int), GLContext.enableGLDebugMessage(boolean)

getContextCreationFlags

public int getContextCreationFlags()

Specified by:

getContextCreationFlags in interface GLAutoDrawable

Returns:

Additional context creation flags

shouldPreserveColorBufferIfTranslucent

public boolean shouldPreserveColorBufferIfTranslucent()

For a translucent GLJPanel (one for which setOpaque(false) has been called), indicates whether the application should preserve the OpenGL color buffer (GL_COLOR_BUFFER_BIT) for correct rendering of the GLJPanel and underlying widgets which may show through portions of the GLJPanel with alpha values less than 1. Most Swing implementations currently expect the GLJPanel to be completely cleared (e.g., by glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT)), but for certain optimized Swing implementations which use OpenGL internally, it may be possible to perform OpenGL rendering using the GLJPanel into the same OpenGL drawable as the Swing implementation uses.

getSurfaceWidth

public int getSurfaceWidth()

Description copied from interface: GLDrawable

Returns the width of this GLDrawable's surface client area in pixel units.

Specified by:

getSurfaceWidth in interface GLDrawable

See Also:

NativeSurface.getSurfaceWidth()

getSurfaceHeight

public int getSurfaceHeight()

Description copied from interface: GLDrawable

Returns the height of this GLDrawable's surface client area in pixel units.

Specified by:

getSurfaceHeight in interface GLDrawable

See Also:

NativeSurface.getSurfaceHeight()

isGLOriented

public boolean isGLOriented()

Returns true if the drawable is rendered in OpenGL's coordinate system, origin at bottom left. Otherwise returns false, i.e. origin at top left.

Default impl. is true, i.e. OpenGL coordinate system.

Currently only MS-Windows bitmap offscreen drawable uses a non OpenGL orientation and hence returns false.
This removes the need of a vertical flip when used in AWT or Windows applications.

Method returns a valid value only after the backend has been initialized, either eagerly or manually via the first display call.
Method always returns a valid value when called from within a GLEventListener.

Specified by:

isGLOriented in interface GLDrawable

setSkipGLOrientationVerticalFlip

public final void setSkipGLOrientationVerticalFlip(boolean v)

Skip isGLOriented() based vertical flip, which usually is required by the offscreen backend, see details about vertical flip and FBO / GLSL vertical flip.

If set to true, user needs to flip the OpenGL rendered scene if isGLOriented() == true, e.g. via the projection matrix.
See constraints of isGLOriented().

getSkipGLOrientationVerticalFlip

public final boolean getSkipGLOrientationVerticalFlip()

See setSkipGLOrientationVerticalFlip(boolean).

getChosenGLCapabilities

public GLCapabilitiesImmutable getChosenGLCapabilities()

Description copied from interface: GLDrawable

Fetches the GLCapabilitiesImmutable corresponding to the chosen OpenGL capabilities (pixel format / visual / GLProfile) for this drawable.

This query only returns the chosen capabilities if GLDrawable.isRealized().

On some platforms, the pixel format is not directly associated with the drawable; a best attempt is made to return a reasonable value in this case.

This object shall be directly associated to the attached NativeSurface's AbstractGraphicsConfiguration, and if changes are necessary, they should reflect those as well.

Specified by:

getChosenGLCapabilities in interface GLDrawable

Returns:

The immutable queried instance.

See Also:

GLDrawable.getRequestedGLCapabilities()

getRequestedGLCapabilities

public final GLCapabilitiesImmutable getRequestedGLCapabilities()

Description copied from interface: GLDrawable

Fetches the GLCapabilitiesImmutable corresponding to the user requested OpenGL capabilities (pixel format / visual / GLProfile) for this drawable.

If realized, the chosen capabilities reflect the actual selected OpenGL capabilities.

Specified by:

getRequestedGLCapabilities in interface GLDrawable

Returns:

The immutable queried instance.

See Also:

GLDrawable.getChosenGLCapabilities()

setRequestedGLCapabilities

public final void setRequestedGLCapabilities(GLCapabilitiesImmutable caps)

Set a new requested GLCapabilitiesImmutable for this GLJPanel allowing reconfiguration.

Method shall be invoked from the AWT-EDT thread. In case it is not invoked on the AWT-EDT thread, an attempt is made to do so.

Method will dispose a previous realized GLContext and offscreen backend!

Parameters:

caps - new capabilities.

getGLProfile

public final GLProfile getGLProfile()

Description copied from interface: GLDrawable

Fetches the GLProfile for this drawable. Returns the GLProfile object, no copy.

Specified by:

getGLProfile in interface GLDrawable

getNativeSurface

public NativeSurface getNativeSurface()

Description copied from interface: GLDrawable

Returns the associated NativeSurface of this NativeSurfaceHolder.

Returns the underlying NativeSurface which native handle represents this OpenGL drawable's native resource.

Specified by:

getNativeSurface in interface GLDrawable

Specified by:

getNativeSurface in interface NativeSurfaceHolder

See Also:

GLDrawable.getHandle()

getHandle

public long getHandle()

Description copied from interface: GLDrawable

Returns the GL drawable handle, guaranteed to be valid after realization and while it's surface is being locked.

It is usually identical to the underlying windowing toolkit surface's handle or an intermediate layer to suite GL, e.g. an EGL surface.

On EGL it is represented by the EGLSurface.
On X11/GLX it is represented by either the Window XID, GLXPixmap, or GLXPbuffer.
On Windows it is represented by the HDC, which may change with each NativeSurface.lockSurface().

Specified by:

getHandle in interface GLDrawable

See Also:

GLDrawable.setRealized(boolean), NativeSurface.lockSurface(), NativeSurface.unlockSurface()

getFactory

public final GLDrawableFactory getFactory()

Description copied from interface: GLDrawable

Return the GLDrawableFactory being used to create this instance.

Specified by:

getFactory in interface GLDrawable

getTextureUnit

public final int getTextureUnit()

Returns the used texture unit, i.e. a value of [0..n], or -1 if non used.

If implementation uses a texture-unit, it will be known only after the first initialization, i.e. display call.

See FBO / GLSL Vertical Flip.

setTextureUnit

public final void setTextureUnit(int v)

Allows user to request a texture unit to be used, must be called before the first initialization, i.e. display() call.

Defaults to 0.

See FBO / GLSL Vertical Flip.

Parameters:

v - requested texture unit

See Also:

getTextureUnit()

getDefaultCloseOperation

public WindowClosingProtocol.WindowClosingMode getDefaultCloseOperation()

Specified by:

getDefaultCloseOperation in interface WindowClosingProtocol

Returns:

the current close operation value

See Also:

WindowClosingProtocol.WindowClosingMode.DISPOSE_ON_CLOSE, WindowClosingProtocol.WindowClosingMode.DO_NOTHING_ON_CLOSE

setDefaultCloseOperation

public WindowClosingProtocol.WindowClosingMode setDefaultCloseOperation(WindowClosingProtocol.WindowClosingMode op)

Specified by:

setDefaultCloseOperation in interface WindowClosingProtocol

Parameters:

op - the new close operation value

Returns:

the previous close operation value

See Also:

WindowClosingProtocol.WindowClosingMode.DISPOSE_ON_CLOSE, WindowClosingProtocol.WindowClosingMode.DO_NOTHING_ON_CLOSE

toString

public String toString()

Specified by:

toString in interface GLDrawable

Overrides:

toString in class Component